ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('31-10_SW0001','2009-12-04T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2008010', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2008010','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#10450=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#10451=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#10452=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#10451);
#10453=(CONVERSION_BASED_UNIT('INCH',#10452)LENGTH_UNIT()NAMED_UNIT(#10450));
#10454=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#10455=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#10456=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #10455);
#10457=(CONVERSION_BASED_UNIT('DEGREE',#10456)NAMED_UNIT(#10454)PLANE_ANGLE_UNIT());
#10458=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#10459=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.472516029262E-5),#10453, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#10460=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #10459))GLOBAL_UNIT_ASSIGNED_CONTEXT((#10453,#10457,#10458))REPRESENTATION_CONTEXT('ID1','3'));
#10462=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#10463=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#10462);
#10464=DESIGN_CONTEXT('',#10462,'design');
#10465=MECHANICAL_CONTEXT('',#10462,'mechanical');
#10466=PRODUCT('31-10_SW0001','31-10_SW0001','NOT SPECIFIED',(#10465));
#10467=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #10466,.MADE.);
#10471=PRODUCT_CATEGORY('part','');
#10472=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#10466));
#10468=PRODUCT_DEFINITION('design','',#10467,#10464);
#10469=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 31-10_SW0001.',#10468);
ENDSEC;
END-ISO-10303-21;