ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('031-102_SW0001','2010-04-15T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2008010', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2008010','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#26127=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#26128=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#26129=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#26128);
#26130=(CONVERSION_BASED_UNIT('INCH',#26129)LENGTH_UNIT()NAMED_UNIT(#26127));
#26131=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#26132=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#26133=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #26132);
#26134=(CONVERSION_BASED_UNIT('DEGREE',#26133)NAMED_UNIT(#26131)PLANE_ANGLE_UNIT());
#26135=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#26136=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.247732625153E-5),#26130, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#26137=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #26136))GLOBAL_UNIT_ASSIGNED_CONTEXT((#26130,#26134,#26135))REPRESENTATION_CONTEXT('ID1','3'));
#26139=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#26140=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#26139);
#26141=DESIGN_CONTEXT('',#26139,'design');
#26142=MECHANICAL_CONTEXT('',#26139,'mechanical');
#26143=PRODUCT('031-102_SW0001','031-102_SW0001','NOT SPECIFIED',(#26142));
#26144=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #26143,.MADE.);
#26148=PRODUCT_CATEGORY('part','');
#26149=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#26143));
#26145=PRODUCT_DEFINITION('design','',#26144,#26141);
#26146=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 031-102_SW0001.',#26145);
ENDSEC;
END-ISO-10303-21;