ELPT 1215 (2 Credit Hours)
Offered at NLC
Electrical Calculations I
This is a WECM Course Number.
Course Description: Introduction to mathematical applications utilized to solve problems in the electrical field. Topics include fractions, decimals, percentages, simple equations, ratio and proportion, unit conversions, and applied geometry. (1 Lec, 2 Lab.)
|
ELPT 1221 (2 Credit Hours)
Offered at NLC
Introduction to Electrical Safety and Tools
This is a WECM Course Number.
Course Description: Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. (2 Lec., 1 Lab.)
|
ELPT 1311 (3 Credit Hours)
Offered at NLC
Basic Electrical Theory
This is a WECM Course Number.
Course Description: Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. (2 Lec., 2 Lab.)
|
ELPT 1319 (3 Credit Hours)
Offered at NLC
Fundamentals of Electricity I
This is a WECM Course Number.
Course Description: An introduction to basic direct current (DC) theory including electron theory and direct current applications. Lab required. (2 Lec., 3 Lab.)
|
ELPT 1320 (3 Credit Hours)
Offered at NLC
Fundamentals of Electricity II
This is a WECM Course Number.
Course Description: Introduces alternating current (AC). Includes AC voltage, frequency, mechanical and electrical degrees, waveforms, resistors, capacitors, and inductors. Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. (2 Lec., 3 Lab.)
|
ELPT 1321 (3 Credit Hours)
Offered at NLC
Introduction to Electrical Safety and Tools
This is a WECM Course Number.
Course Description: Safety rules and regulations. Includes the selection, inspection, use, and maintenance of common tools for electricians. This course is cross-listed as ELPT 1221. The student may register for either ELPT 1321 or ELPT 1221 but may receive credit for only one of the two. (2 Lec., 3 Lab.)
|
ELPT 1325 (3 Credit Hours)
Offered at NLC
National Electrical Code I
This is a WECM Course Number.
Course Description: An introductory study of the National Electric Code (NEC) for those employed in fields requiring knowledge of the Code. Emphasis on wiring design, protection, methods, and materials; equipment for general use; and basic calculations. (2 Lec., 2 Lab.)
|
ELPT 1329 (3 Credit Hours)
Offered at NLC
Residential Wiring
This is a WECM Course Number.
Course Description: Wiring methods for single family and multi-family dwellings. Includes load calculations, service entrance sizing, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
|
ELPT 1341 (3 Credit Hours)
Offered at NLC
Motor Control
This is a WECM Course Number.
Course Description: Operating principles of solid-state and conventional controls along with their practical applications. Includes braking, jogging, plugging, safety interlocks, wiring, and schematic diagram interpretations (2 Lec., 2 Lab.)
|
ELPT 1345 (3 Credit Hours)
Offered at NLC
Commercial Wiring
This is a WECM Course Number.
Course Description: Commercial wiring methods. Includes overcurrent protection, raceway panel board installation, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
|
ELPT 1357 (3 Credit Hours)
Offered at NLC
Industrial Wiring
This is a WECM Course Number.
Course Description: Wiring methods used for industrial installations. Includes motor circuits, raceway and bus way installations, proper grounding techniques, and associated safety procedures. (2 Lec., 2 Lab.)
|
ELPT 1370 (3 Credit Hours)
Offered at NLC
Electrical Blueprint Reading
This is a Local Need Course.
Course Description: Blueprint reading covering the theory of projection, architectural and engineering symbols, relationship of views, and measuring with as they relate to the electrical construction industry. (3 Lec.)
|
ELPT 1391 (3 Credit Hours)
Offered at NLC
Special Topics in Electrical and Power Transmission Installer, General
This is a WECM Course Number.
Course Description: Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course may be repeated if topics and learning outcomes vary. (2 Lec., 2 Lab.)
|
ELPT 2437 (4 Credit Hours)
Offered at NLC
Electrical Planning and Estimating
This is a WECM Course Number.
Course Description: Planning and estimating for residential, commercial, and industrial wiring systems. Includes a variety of electrical techniques. (3 Lec., 2 Lab.)
|
ELPT 2443 (4 Credit Hours)
Offered at NLC
Electrical Systems Design
This is a WECM Course Number.
Course Description: Electrical design of commercial and/or industrial projects including building layout, types of equipment, placement, sizing of electrical equipment, and all electrical calculations according to the requirements of the National Electrical Code (NEC). (3 Lec., 2 Lab.)
|