The SHO V6 was a high-tech and revolutionary design when it debuted in 1988. Displacing 3.0 L (2986 cc/182 cu in), it was an iron block, aluminum head 24-valve DOHC engine with an innovative variable length intake manifold. Its oversquare and symmetrical design, which sported an 89 mm (3.5 in) bore and 80 mm (3.1 in) stroke, gave the high-revving engine an output of 220 bhp (164 kW; 223 PS) at 6200 rpm and 200 lb·ft (271 N·m) of torque at 4800 rpm at the flywheel, and it sported the added luxury of being able to be used in rear-drive applications. Redline was marked on the tachometer at 7000 rpm, and fuel cut-off occurred at 7300 rpm. The engine was capable of 8500 rpm, but it was electronically limited to 7000 rpm due to the Ford accessories in the prototypes malfunctioning at approximately 8000 rpm.[citation needed] This engine was only available with the Ford MTX-IV transmission.From 1993 to 1995, the SHO engine was sold in two displacements: the existing 3.0 L continued to be sold mated to the MTX-IV manual transmission, and a new 3.2 L engine (3191 cc/195 cu in) was sold mated to the Ford AX4S automatic transmission. The new 3.2 L engine, while retaining the same 80 mm (3.1 in) stroke of its 3.0 L brother, sported a larger 92 mm (3.6 in) bore that helped raise torque output to 215 lb·ft (292 N·m) at 4000 rpm at the flywheel.[11] Horsepower output was still 220 bhp (164 kW; 223 PS), but now at 6000 rpm: This was due to a milder cam setup compared to the more aggressive intake camshaft in the 3.0 L version.[WIKI]
|