The X20XEV is the first Family II engine branded as Ecotec, a mass-market successor to the C20XE with a Lotus-developed cylinder head. The new cylinder head had a smaller valve angle compared to the older C20XE, which was supposed to give more torque in the lower revs. It is a 1,998 cc (121.9 cu in) naturally aspirated engine with 16 valves and belt driven double overhead camshafts (DOHC). 86 mm (3.4 in) bore and stroke in cast-iron OHC-derived cylinder block and aluminium cylinder head. The X20XEV was equipped with exhaust gas recirculation (EGR) to reduce nitrogen dioxide emissions and air injection reactor (AIR) to speed up the warming up of the catalytic converter and to reduce unburnt hydrocarbons and carbon monoxide. The engine is capable of producing 100 kW (136 PS; 134 bhp).[17] A higher output version called the X20XER[citation needed] was also produced that gives 167 hp (125 kW) power and 136 lb·ft (185 N·m) torque. The L34 also known as the U20SED is a 2.0 L (1,998 cc (121.9 cu in)) engine that was built until 2009 by Holden in Australia, dubbed D-TEC by GMDAT (the new Daewoo after the buyout from GM) or E-TEC II by Chevrolet (GM). It has an 86.0 mm (3.39 in) bore and stroke. Power is rated at 119 hp (89 kW) in South America and Europe, 126 hp in Canada, and 132 hp in the United States; all are at 5400 rpm and torque is rated at 126 lb·ft (171 N·m). The engine has been used on the Daewoo Lacetti and it's various rebagded models, such as Chevrolet Optra, Chevrolet Evanda, Suzuki Reno, and Suzuki Forenza.[WIKI]
|