Skip to content

Benchtop Mill & Lathe Rescource

  • About Us
  • Contact Us

Benchtop Mill & Lathe Rescource

Taig & Sherline Reviews & Comparison

Sherline & Taig CNC Mill & Lathe Upgrades, Reviews for Fultondale, AL 35068

March 30, 2017 by rFdFGLBaXc

Many have an interest in ISO20, IS030, BT30 and 5C headstocks for both Sherline and Taig mills and lathes in the Fultondale, AL. Automatic tool changers, or ATC, attract many people. There’s just on place to get the at a reasonable cost and that’s GlockCNC. Upgrading to a ISO20 or BT30 is ideal for the mill. Choosing a 5C is perfect for the lathes. Of course, you would require to upgrade the headstock, bearings and motor. High speed balancing is also a perk. The availability of tooling for each of these models is excellent. For 5C collet sets, you can get very good quality from Hardinge.

Sherline headstocks and parts come in a range of designs from the factory. Usually ER16 and MT1. Both of which are really small. Sherline also offers WW collet sets for really small work. Mainly watchmakers and clockmakers use the WW collets. The majority of prefer ER25, ER32 or perhaps ER40 collet sizes with a larger spindle pass through hole. The 5C collet for the Sherline lathe would be the very best. For Sherline mills, the majority of truly don’t care for the MT1 and barely like the ER16. An R8 spindle with a low profile would be best. It offers the most versatility and many tool choices. You can find numerous evaluations on both the lathe and the mill. Popular models are the 2000, 5400, 4000 and 4500 in metric and inch. The also been available in CNC, handbook and CNC all set variations. Recently, they have included ballscrew versions for sale. This is far much better than the older leadscrew type. Search the internet if you want an evaluation or comparison of ballscrews compared to leadscrews. There are suppliers near Fultondale.

Taig also offers lathes and mills. It’s Sherlines primary competition. In fact, you can discover a great deal of videos and short articles referring to Taig vs Sherline. The Taig items use a lot more stiff ways and normally more “sturdy” in general. The Taig motors are pretty weak, much like the Sherline motors. A high quality brushless motor can make the machine look like an absolutely different mill or lathe. Taig also offers a nice CNC prepared mill and lathe. You can also go with their digital CNC system which uses closed-looped steppers and Mach3 software. The Taig spindles have the very same problems as the Sherline. They are far too little. The only exception is the 5C collet headstock model they use. We will do an evaluation of the 5C in the future. The nice thing is that they now use a ballscrew choice for their mill and lathe. Plus, the offer a “gang tool” lathe. The disadvantage with both manufactures is the absence of major upgrades.

Sherline offers lots of parts and accessories, however very little to make it a much better machine. To start with, they headstock usages bad quality bearings and the bearings are too little. This implies the spindle itself requires to be little. A spindle with extremely little mass indicates the lathe or mill the surface quality will not be as excellent and subject to vibration issues. For example, they offer many lathe devices, but you can’t get a 5C headstock or ER25, ER32 or ER40. Plus, the travel through hole has to be small because the bearings are little. There is a similar concern with the mill. You can only use ER16 collets and this restricts its usage. Of course those in Fultondale, Alabama 35068 may have different needs.

Video: Taig CNC in Fultondale

There are other machine choices too. You can also purchase from Grizzly or Harbor Freight, along with other providers that provide Chinese mills and lathes. Obviously the quality isn’t real excellent. Lots of wind up either very dissatisfied or doing a lot of modifications to get the machine to do what they want. Exceptional upgrades are ballscrews, upgraded brushless motor, encoder for threading and so on.

If you prefer to opt for a CNC machine, your best bet is the Centroid Acorn. The software and hardware is far better than Mach3 or much of the hardware choices in the market. You can do rigid tapping and threading if you have an encoder. Plus, it provides consistent speed for turning applications. Mach3 and Mach4 were the standard for many years. Nevertheless, they were clunky at finest and really just focused on amature use. Centroid is a well recognized commercial manufacture of mills. A lot of which are 5 axis machines. The best servos to use for CNC on the Sherline or Taig are either DMM, Clearpath or GlockCNC brand names. Combine that with the Centroid Acorn and you will have a powerful machine. We will likewise produce evaluations of the Taig CNC mill and Sherline CNC mill utilizing the Acorn hardware.

What about a much better jaw chuck for the lathe? Numerous grumble that the small chucks won’t hold steel for cutting. The part will simply fall out. On choice is to purchase a headstock with a jaw chuck adapter integrated in. This can open up more alternatives for 5″ or 6″ chuck. Especially if you opt for larger bearings.

Related

Post navigation

Previous Post:

Sherline & Taig Lathe & Mill Upgrades, Reviews for Onancock, VA 23417

Next Post:

Sherline & Taig CNC Mill & Lathe Upgrades, Reviews for San Antonio, TX 78232

Recent Posts

  • Sherline & Taig Lathe & Mill Upgrades, Reviews for Rose City, MI 48654
  • Sherline & Taig CNC Mill & Lathe Upgrades, Reviews for Shandon, CA 93461
  • Sherline & Taig Lathe & Mill Upgrades, Reviews for San Andreas, CA 95249
  • Sherline & Taig Lathe & Mill Upgrades, Reviews for Glen Ullin, ND 58631
  • Sherline & Taig Lathe & Mill Upgrades, Reviews for Sunland, CA 91041

Recent Comments

    Archives

    • April 2019
    • March 2019
    • February 2019
    • January 2019
    • December 2018
    • November 2018
    • October 2018
    • September 2018
    • August 2018
    • July 2018
    • June 2018
    • May 2018
    • April 2018
    • March 2018
    • February 2018
    • January 2018
    • December 2017
    • November 2017
    • October 2017
    • September 2017
    • August 2017
    • July 2017
    • June 2017
    • May 2017
    • April 2017
    • March 2017
    • February 2017
    • January 2017
    • December 2016
    • November 2016
    • October 2016
    • September 2016
    • August 2016
    • July 2016

    Categories

    • No categories

    Meta

    • Log in
    • Entries RSS
    • Comments RSS
    • WordPress.org
    © 2019 Benchtop Mill & Lathe Rescource | WordPress Theme by Superbthemes
     

    Terms and Conditions - Privacy Policy