Skip to content

Benchtop Mill & Lathe Rescource

  • About Us
  • Contact Us

Benchtop Mill & Lathe Rescource

Taig & Sherline Reviews & Comparison

Sherline & Taig Lathe & Mill Upgrades, Reviews for Grand Rapids, MI 49544

April 29, 2017 by rFdFGLBaXc

Lots of are interested in ISO20, IS030, BT30 and 5C headstocks for both Sherline and Taig mills and lathes in the Grand Rapids, MI. Automatic tool changers, or ATC, appeals to lots of individuals. There’s only on place to get the at a reasonable price which’s GlockCNC. Upgrading to a ISO20 or BT30 is ideal for the mill. Going with a 5C is perfect for the lathes. Obviously, you would need to upgrade the headstock, bearings and motor. High speed balancing is also a benefit. The availability of tooling for each of these designs is excellent. For 5C collet sets, you can get excellent quality from Hardinge.

Sherline headstocks and parts been available in a variety of models from the factory. Normally ER16 and MT1. Both of which are really little. Sherline also uses WW collet sets for extremely small work. Generally watchmakers and clockmakers use the WW collets. Most prefer ER25, ER32 or perhaps ER40 collet sizes with a bigger spindle pass through hole. The 5C collet for the Sherline lathe would be the very best. For Sherline mills, many really do not care for the MT1 and barely like the ER16. An R8 spindle with a low profile would be best. It provides one of the most versatility and numerous tool choices. You can discover numerous reviews on both the lathe and the mill. Popular designs are the 2000, 5400, 4000 and 4500 in metric and inch. The also can be found in CNC, handbook and CNC prepared variations. Recently, they have actually added ballscrew versions for sale. This is far much better than the older leadscrew type. Browse the internet if you desire an evaluation or contrast of ballscrews compared to leadscrews. There are suppliers near Grand Rapids.

Taig also offers lathes and mills. It’s Sherlines primary competition. In fact, you can find a great deal of videos and posts referring to Taig vs Sherline. The Taig products offer far more stiff ways and typically more “strong” overall. The Taig motors are quite weak, similar to the Sherline motors. A high quality brushless motor can make the machine look like a totally different mill or lathe. Taig also offers a good CNC all set mill and lathe. You can also select their digital CNC system which uses closed-looped steppers and Mach3 software. The Taig spindles have the same problems as the Sherline. They are far too small. The only exception is the 5C collet headstock design they offer. We will do an evaluation of the 5C in the future. The good thing is that they now use a ballscrew choice for their mill and lathe. Plus, the deal a “gang tool” lathe. The drawback with both manufactures is the absence of severe upgrades.

Sherline provides many parts and accessories, however very little to make it a much better machine. To start with, they headstock usages bad quality bearings and the bearings are too small. This indicates the spindle itself needs to be small. A spindle with very little mass implies the lathe or mill the surface quality will not be as excellent and based on vibration problems. For example, they offer many lathe accessories, but you can’t get a 5C headstock or ER25, ER32 or ER40. Plus, the travel through hole needs to be small since the bearings are little. There is a comparable problem with the mill. You can just use ER16 collets and this limits its use. Of course those in Grand Rapids, Michigan 49544 may have different needs.

Video: Sherline CNC in Grand Rapids

There are other machine choices too. You can also buy from Grizzly or Harbor Freight, together with other suppliers that offer Chinese mills and lathes. Of course the quality isn’t real good. Numerous wind up either very dissatisfied or doing a great deal of modifications to get the machine to do what they desire. Excellent upgrades are ballscrews, upgraded brushless motor, encoder for threading and so on.

If you want to opt for a CNC machine, your best choice is the Centroid Acorn. The software application and hardware is far better than Mach3 or a number of the hardware choices in the market. You can do rigid tapping and threading if you have an encoder. Plus, it uses continuous speed for turning applications. Mach3 and Mach4 were the standard for several years. However, they were cumbersome at best and really only focused on amature usage. Centroid is a well recognized industrial manufacture of mills. Many of which are 5 axis machines. The best servos to use for CNC on the Sherline or Taig are either DMM, Clearpath or GlockCNC brands. Integrate that with the Centroid Acorn and you will have a powerful machine. We will likewise produce reviews of the Taig CNC mill and Sherline CNC mill using the Acorn hardware.

What about a better jaw chuck for the lathe? Many complain that the small chucks will not hold steel for cutting. The part will simply fall out. On option is to purchase a headstock with a jaw chuck adapter integrated in. This can open up more choices for 5″ or 6″ chuck. Specifically if you choose bigger bearings.

Related

Post navigation

Previous Post:

Sherline & Taig Lathe & Mill Upgrades, Reviews for Poston, AZ 85371

Next Post:

Sherline & Taig CNC Mill & Lathe Upgrades, Reviews for Ponca City, OK 74604

Recent Posts

  • Sherline & Taig Lathe & Mill Upgrades, Reviews for Rose City, MI 48654
  • Sherline & Taig CNC Mill & Lathe Upgrades, Reviews for Shandon, CA 93461
  • Sherline & Taig Lathe & Mill Upgrades, Reviews for San Andreas, CA 95249
  • Sherline & Taig Lathe & Mill Upgrades, Reviews for Glen Ullin, ND 58631
  • Sherline & Taig Lathe & Mill Upgrades, Reviews for Sunland, CA 91041

Recent Comments

    Archives

    • April 2019
    • March 2019
    • February 2019
    • January 2019
    • December 2018
    • November 2018
    • October 2018
    • September 2018
    • August 2018
    • July 2018
    • June 2018
    • May 2018
    • April 2018
    • March 2018
    • February 2018
    • January 2018
    • December 2017
    • November 2017
    • October 2017
    • September 2017
    • August 2017
    • July 2017
    • June 2017
    • May 2017
    • April 2017
    • March 2017
    • February 2017
    • January 2017
    • December 2016
    • November 2016
    • October 2016
    • September 2016
    • August 2016
    • July 2016

    Categories

    • No categories

    Meta

    • Log in
    • Entries RSS
    • Comments RSS
    • WordPress.org
    © 2019 Benchtop Mill & Lathe Rescource | WordPress Theme by Superbthemes
     

    Terms and Conditions - Privacy Policy