Skip to content

Benchtop Mill & Lathe Rescource

  • About Us
  • Contact Us

Benchtop Mill & Lathe Rescource

Taig & Sherline Reviews & Comparison

Sherline & Taig Lathe & Mill Upgrades, Reviews for Katy, TX 77449

September 30, 2018 by rFdFGLBaXc

Many have an interest in ISO20, IS030, BT30 and 5C headstocks for both Sherline and Taig mills and lathes in the Katy, TX. Automatic tool changers, or ATC, appeals to lots of people. There’s only on place to get the at a reasonable cost which’s GlockCNC. Upgrading to a ISO20 or BT30 is ideal for the mill. Choosing a 5C is perfect for the lathes. Naturally, you would require to upgrade the headstock, bearings and motor. High speed balancing is also a benefit. The availability of tooling for each of these designs is exceptional. For 5C collet sets, you can get excellent quality from Hardinge.

Sherline headstocks and parts can be found in a range of designs from the factory. Generally ER16 and MT1. Both of which are very little. Sherline also provides WW collet sets for extremely tiny work. Primarily watchmakers and clockmakers utilize the WW collets. Many choose ER25, ER32 and even ER40 collet sizes with a bigger spindle pass through hole. The 5C collet for the Sherline lathe would be the best. For Sherline mills, many really do not care for the MT1 and hardly like the ER16. An R8 spindle with a low profile would be best. It offers the most versatility and lots of tool options. You can find lots of evaluations on both the lathe and the mill. Popular designs are the 2000, 5400, 4000 and 4500 in metric and inch. The likewise come in CNC, handbook and CNC ready versions. Recently, they have actually added ballscrew versions for sale. This is far much better than the older leadscrew type. Search the internet if you want a review or contrast of ballscrews compared to leadscrews. There are suppliers near Katy.

Taig also uses lathes and mills. It’s Sherlines primary competitors. In reality, you can find a lot of videos and short articles referring to Taig vs Sherline. The Taig products use a lot more stiff ways and generally more “strong” in general. The Taig motors are quite weak, similar to the Sherline motors. A high quality brushless motor can make the machine appear like a totally different mill or lathe. Taig likewise offers a nice CNC all set mill and lathe. You can also go with their digital CNC system which utilizes closed-looped steppers and Mach3 software application. The Taig spindles have the same problems as the Sherline. They are far too little. The only exception is the 5C collet headstock design they provide. We will do a review of the 5C in the future. The nice thing is that they now offer a ballscrew alternative for their mill and lathe. Plus, the deal a “gang tool” lathe. The drawback with both produces is the absence of severe upgrades.

Sherline uses numerous parts and accessories, but very little to make it a better machine. To begin with, they headstock usages bad quality bearings and the bearings are too little. This means the spindle itself requires to be little. A spindle with extremely little mass means the lathe or mill the finish quality won’t be as excellent and subject to vibration problems. For example, they offer lots of lathe devices, but you can’t get a 5C headstock or ER25, ER32 or ER40. Plus, the pass through hole has to be little because the bearings are small. There is a similar problem with the mill. You can just use ER16 collets and this restricts its use. Of course those in Katy, Texas 77449 may have different needs.

Video: Sherline CNC in Katy

There are other machine alternatives too. You can also buy from Grizzly or Harbor Freight, along with other providers that provide Chinese mills and lathes. Of course the quality isn’t genuine great. Lots of wind up either very disappointed or doing a great deal of modifications to get the machine to do what they desire. Excellent upgrades are ballscrews, upgraded brushless motor, encoder for threading and so on.

If you want to choose a CNC machine, your best choice is the Centroid Acorn. The software application and hardware is far much better than Mach3 or a number of the hardware choices in the market. You can do rigid tapping and threading if you have an encoder. Plus, it uses continuous speed for turning applications. Mach3 and Mach4 were the requirement for many years. However, they were cumbersome at best and truly only targeted at amature usage. Centroid is a well established business manufacture of mills. A number of which are 5 axis devices. The best servos to use for CNC on the Sherline or Taig are either DMM, Clearpath or GlockCNC brand names. Combine that with the Centroid Acorn and you will have an effective machine. We will also produce evaluations of the Taig CNC mill and Sherline CNC mill using the Acorn hardware.

What about a better jaw chuck for the lathe? Numerous complain that the small chucks won’t hold steel for cutting. The part will simply fall out. On choice is to purchase a headstock with a jaw chuck adapter built in. This can open up more options for 5″ or 6″ chuck. Specifically if you choose larger bearings.

Related

Post navigation

Previous Post:

Sherline & Taig Lathe & Mill Upgrades, Reviews for Redondo Beach, CA 90278

Next Post:

Sherline & Taig CNC Mill & Lathe Upgrades, Reviews for Sassafras, KY 41759

Recent Posts

  • Sherline & Taig Lathe & Mill Upgrades, Reviews for Rose City, MI 48654
  • Sherline & Taig CNC Mill & Lathe Upgrades, Reviews for Shandon, CA 93461
  • Sherline & Taig Lathe & Mill Upgrades, Reviews for San Andreas, CA 95249
  • Sherline & Taig Lathe & Mill Upgrades, Reviews for Glen Ullin, ND 58631
  • Sherline & Taig Lathe & Mill Upgrades, Reviews for Sunland, CA 91041

Recent Comments

    Archives

    • April 2019
    • March 2019
    • February 2019
    • January 2019
    • December 2018
    • November 2018
    • October 2018
    • September 2018
    • August 2018
    • July 2018
    • June 2018
    • May 2018
    • April 2018
    • March 2018
    • February 2018
    • January 2018
    • December 2017
    • November 2017
    • October 2017
    • September 2017
    • August 2017
    • July 2017
    • June 2017
    • May 2017
    • April 2017
    • March 2017
    • February 2017
    • January 2017
    • December 2016
    • November 2016
    • October 2016
    • September 2016
    • August 2016
    • July 2016

    Categories

    • No categories

    Meta

    • Log in
    • Entries RSS
    • Comments RSS
    • WordPress.org
    © 2019 Benchtop Mill & Lathe Rescource | WordPress Theme by Superbthemes
     

    Terms and Conditions - Privacy Policy